EN CH

Solar module Fully-automatic laminator

Product features

Single, dual, double chambers and three chambers to meet different customer needs

Configure customized loading/unloading platform according to different lamination requirements and space requirements

Maximum area of heat plate reaches 25.38㎡

Maximum capacity reaches 350MW/year

Technical Parameters

Technical ParametersRelated parameters
Effective lamination area2400 mm×5500mm×2
Equipment Dimension27970mm ×3300 mm×2540mm
Total weight49T
Operation PowerAC 380V 3-phase 5-wire system
PowerTotal power : 195kW, normal working power : 110kW
Compressed airPressure 0.7~0.8MPa; compressed air flow ≥1000L/min 
Cooling water

Pressure 0.2 ~ 0.3Mpa, flow rate 2060L/min (including Roots pump), water temperature is not higher than 25℃

TemperatureTemperature distribution uniformity ±1.5℃; temperature control accuracy ±1℃; temperature control range 30℃-180℃
VacuumThe ultimate vacuum is 30Pa; can quickly go below than 120Pa from the atmospheric state within 120 seconds
Pressurization pressureThree inflation speed modes adjustable; from -100KPa to 0KPa

Inflation 

Inflate from -100KPa to 0KPa within 10 seconds

Cooling

Cooling in the cooling section

The specific parameters are subject to change without notice.
Return